Sidel on Heat Lamp Supplier

Replacement lamp for Sidel SBO 20 Series 1

Sun, 26 Jul 2026 00:32:53 +0800

Stop Fighting Thermal Variance in Your Sidel SBO 20 Series 1

Ever notice your bottles coming out a bit… off? Maybe the walls are too thin in some spots, or the shape looks slightly warped. Most of the time, the culprit is something simple: mismatched IR lamps. When you throw lamps with different power outputs into the same oven, the preform doesn’t heat evenly. It’s a mess. We fixed this by building replacement lamps for the Sidel SBO 20 Series 1 that match the power 100%. No guesswork. Just a flat, consistent heat profile. The nitty-gritty on power matching Here’s the thing: thermal consistency comes down to the exact voltage and wattage of that quartz tube. If the ohms are even a little bit off, your heat density shifts. We build our lamps to hit the exact OEM wattage. Why does that matter? Because your PID controllers won’t have to fight “cold spots” caused by cheap, under-powered replacements. You just get a stable, reliable heat soak. It’s a relief. What’s actually inside We use high-purity quartz glass because it can take the hit of rapid heating and cooling without cracking. The shortwave IR emitter is designed to punch through the PET resin quickly. As for the fit, we use the standard industrial connectors—usually R7s or Sk15, depending on your setup. You just drop them in. No rewiring, no headaches. Plus, the coating on the tubes reflects the heat inward toward the preform. It’s way more efficient. But a quick heads-up: these lamps put out a lot of radiant heat. If your cooling fans are clogged with dust, you’re basically baking your reflectors. Keep those fans clean. Getting them running Installing these is a straight swap. Since the power match is 1:1, you usually don’t even need to mess with your heating profile. One pro tip: replace your lamps in full zones rather than doing them one by one. If you mix new and old, you’ll get “zebra striping” on your preforms. Swap the whole zone, keep your cycle times fast, and stop throwing scrap in the bin.

Replacement lamp for SIDEL SBO Series 2

Mon, 20 Jul 2026 00:14:42 +0800

No More Headaches with Sidel SBO and Matrix Heating Lamps

Let’s be honest: the last thing you want when you’re staring at a PET blowing machine is a replacement part that almost fits. “Almost” usually means you’re spending your afternoon hacking away at a lamp holder or praying the power supply doesn’t fry. We’ve spent a lot of time making sure our lamps just work. Whether you’re running the old-school SBO series or the newer Matrix lines, these are designed to slide right in. No fuss, no modifications.

Generic SIDEL replacement lamp

Mon, 20 Jul 2026 00:07:31 +0800

Stop Fighting with Your KHS or Sidel Blow Molders

Nothing is more frustrating than pulling a batch of PET bottles off the line and seeing that cloudy, pearlescent haze. Or worse, noticing the walls are thin in some spots and thick in others. It’s a waste of preforms and a headache for anyone running the floor. Usually, when your heating isn’t uniform, it comes down to two things: the spectral output and how centered that filament actually is inside your infrared lamps. The truth about heat distribution We build our replacement lamps to fit the exact footprint of OEM ovens, but the real magic is in the millimeters. Think about it. These high-wattage quartz halogen tubes need the filament to be dead-center. If it’s off by even a tiny bit, you get hot spots. Simple as that. To fix this, we use a high-purity quartz envelope. It stops the lamp from absorbing its own heat, meaning more of that short-wave radiation actually hits the PET instead of just baking your lamp housing. We also build them to handle high-voltage spikes, so they don’t just pop the moment you start rapid cycling. No fuss, just a fit These are drop-in replacements. We use standard R7s or SK15 connectors, so they wire up exactly like the ones you’re replacing. No hacking, no adapters. We also treat the quartz glass to handle the grime and caustic environment of a bottling plant. It’s tough. But the real detail is the tolerance. We keep the length and diameter tight. Why? Because if there’s a gap between the lamp and the preform, you lose heat density. It’s like trying to warm your hands by a fire while standing three feet too far back. A couple of things to watch out for Cranking up the heat density is great for your cycle times. It gets things moving faster. But here’s the catch: more wattage means more heat for your oven’s cooling blowers to handle. If your vents are clogged or your blowers are struggling, that ambient heat is going to kill your lamps early. And a pro tip? Keep your reflectors clean. If they’re dusty, your thermal field goes to waste. Keep them shiny, and your lamps will do the heavy lifting for you.

Sidel SBO 6 Series 2 heater lamp spare

Mon, 06 Jul 2026 00:07:42 +0800

Sidel SBO 6 Series 2 Infrared Heater Lamp: Built to Be the Perfect Match for SIPA Rotary Machines

We built the Sidel SBO 6 Series 2 heater lamp to be a straight-up, 100% power-matched swap for SIPA rotary machines. You know how it is on a PET blowing line—everything runs tight, and the slightest heating hiccup can throw the whole rhythm off. This lamp was designed to stop that variability in its tracks by matching your machine’s electrical and thermal profile exactly.