Tube on Heat Lamp Supplier

halogen tube for drying

Mon, 01 Jun 2026 15:52:30 +0800

Halogen Tubes for Industrial Drying: Power, Design, and How They Get the Job Done

We built these halogen tubes for one reason: to dry things fast. They don’t mess around—delivering intense, focused heat right where you need it. These aren’t your average bulbs. They’re shortwave infrared heaters, tough enough for the factory floor, and designed to jump to temperature quickly so moisture doesn’t stand a chance.

Power, voltage, and size—made to fit your line

These tubes are all about high power in a small footprint. You’ll often see a setup like 2500W running on 400V. That high-voltage approach keeps the current lower, which means you can use thinner wiring and avoid voltage drop over distance. The length—around 300mm—is intentional. It’s a sweet spot that lets you squeeze the heater into tight spots on a conveyor or drying tunnel without cutting back on wattage.

infrared heating tube ir tungsten halogen lamp 700mm 220v 1500w

Tue, 26 May 2026 21:33:00 +0800

We built this 700mm infrared tungsten halogen heating tube for industrial work—the kind that needs heat you can focus and control like a dial. It’s a short-wave IR emitter, so it gets hot fast and aims that heat straight at the target. No fuss, no heating up the whole room. Just direct, clean warmth where you point it. Here’s the thing about the power setup: it runs on 220V at 1500W, which hits that sweet spot between serious output and standard shop power. The 700mm length gives you a clear, predictable heat footprint, so you can match the heat zone to the part. The wattage is high enough to ramp up quickly, but it’s not so demanding that it pushes your circuit to the edge like those monster 3000W-plus tubes. Pair it with a solid SSR or PID controller, and you get tight, repeatable control. Inside, the filament is tungsten—because it can take the heat and keep its resistance steady. The halogen cycle keeps the filament clean by pulling evaporated tungsten and putting it back where it belongs. That means a longer life and steady output over time. The envelope is quartz, tough enough to handle thermal shock and clear enough to transmit short-wave IR cleanly. So even when you cycle it on and off again and again, it keeps its head. No drift, no fuss. Use this tube wherever you need fast, focused heating: thermoforming, coating curing, plastic welding, drying—you name it. The 700mm size slips easily into many machine bays, and the 220V rating keeps the wiring straightforward. But keep in mind: short-wave means intense heat. Manage reflected energy, and make sure you’ve got cooling and shielding in place to protect nearby parts. That’s the trade-off for that kind of focused power.

halogen heating element 3kw heating tube

Tue, 19 May 2026 09:59:22 +0800

Meet the 3kW Halogen Heating Tube: Serious Heat, Small Package

We built this 3kW halogen heating element for engineers who need a lot of heat—without taking up a lot of space. The punch is that 3kW rating, giving you high heat density so you get up to speed fast. It runs on 220–240V or 380–400V, so it plugs straight into industrial power without needing a separate transformer. And at about 300mm long, it slips right into tight spots—think crowded machine bays and short-barrel heaters.

halogen elegant tube

Sun, 17 May 2026 13:32:21 +0800

What We Built: The Halogen Elegant Tube

We built the Halogen Elegant Tube for one reason: to give you serious heat in a seriously small space. It’s a compact infrared emitter made for industrial heating—the kind of job where you can’t afford to compromise on heat, but you’re working with tight real estate. This isn’t some do-everything bulb. It’s a specialist. A purpose-built heater that gets wired up quickly and just keeps running.

The Nitty-Gritty: Power, Voltage, and Fit

The magic is in how fast it responds. The filament heats up almost instantly, so you’re not waiting around for it to warm up. You get to match the voltage and wattage to your exact process needs, not the other way around. And for those plant lines that run on higher distribution voltages, a 400V rating is common. That means you can run longer cables with less current. We also made sure the tube’s length fits snugly into tight machine footprints, while still delivering a precise, focused heat pattern right where you need it.

Clear quartz near infrared lamp 870mm 1700w infrared halogen heating tube

Sat, 09 May 2026 10:41:12 +0800

Power That Gets Straight to Work

We built this clear quartz near-infrared lamp as a 1700W halogen heating tube, 870mm long. That combo wasn’t chosen by accident. It gives you a tight, focused heat profile—exactly what industrial work needs when you want heat now, not five minutes from now. The 1700W punch delivers serious radiant power without taking up a lot of room. That means you can design a smaller heating zone and still keep output where you need it. And the 870mm length? It lays down a predictable illumination pattern, so you can keep line-of-sight heating consistent across a machine bed or an oven lane.

500w halogen tube

Sun, 03 May 2026 23:50:52 +0800

500W Halogen Tube: The Heat Workhorse for Tight Spaces

We built this 500W halogen tube for the moments when you need serious heat, but you don’t have the room to spare. It’s the kind of tool you reach for when your industrial process is squeezed for space, but you still need precise, reliable temperatures. Think of it as your go-to for jobs that can’t wait—like plastic forming, sealing, or spot heating on the line. It gets hot, fast. And once it’s hot, it stays steady. No fuss, no waiting around.

Medium wave SK15 IR heating tube 1600w 495mm tungsten halogen lamp for dryers

Sun, 03 May 2026 17:16:56 +0800

Introduction

We built the Medium Wave SK15 IR heating tube to be the kind of heat source you can drop straight into your industrial drying setup—no fuss, no redesigns. It’s a 1600W tungsten halogen lamp, and it was made to give you fast, controllable infrared heat in a seriously compact package. At 495mm long and with an SK15 base, it’s designed to slide right into your existing dryer fixtures like it was always meant to be there.

infrared heating emitter halogen lamp replacement halogen heater tube far infrared lamp

Sun, 03 May 2026 01:26:33 +0800

Introduction

Let’s get straight to it. We built these infrared heating emitters to be the perfect one-and-done swap for your old halogen lamps. These are rugged, no-nonsense units made for the factory floor. They pack a serious punch in a small package. They’re your best bet when you just need to replace a worn-out halogen heater tube without the headache of redesigning the whole machine.

The Nitty-Gritty: Power, Voltage, and Fit

Here’s the beauty of it: these emitters are made to slide right into the same spot your old halogen tube used to occupy. The dimensions are spot on. We’re talking a standard 300mm length, which matches up with most of the older assemblies out there. And the power? It’s serious. A 2500W rating is typical for this size, so you get a lot of heat from a compact unit. Voltage is a big deal with these. A lot of them run on 400V. Why does that matter? Well, that higher voltage lets us deliver all that wattage while drawing less current. Less current means you can use thinner, cheaper wiring and you won’t get that annoying voltage drop over long runs. The catch is that your control gear and insulation need to be rated for the higher voltage, so your machine’s electrical setup has to be compatible.

Hot selling infrared halogen heating tube 980mm 4000w infrared heating lamp

Tue, 28 Apr 2026 16:12:16 +0800

Introduction

We built this 4000W infrared halogen heating tube for one reason: to get things hot, fast. Right where you need it. Think of it as a direct blast of heat—perfect for industrial jobs that demand quick, focused warmth. Whether you’re curing coatings, heating platens, or working with plastics, this 980mm lamp is designed to deliver serious energy into a tight spot. The whole point? Heat up your target material quickly, with control you can count on.